Home

Modal Analysis
Model Correlation
Modal Testing with Laser Vibrometer
Impact Testing
DiskDrive_Modal_Correlation.JPG
IMG_0238.JPG
Club Head FRF Notes.jpg
Vibration Consulting Services
Floor Frequency Response Testing
Floor Vibration Testing
Train Ground Vibration Testing
IMG_3797.JPG
IMG_3543.JPG
IMG_4218.JPG
Noise Consulting Services
3D Noise Map Power Plant
Noise Model Cogen
Map 1 3D Gas Plant.jpg
Map 0 Converted Power Plant.png
3D w Noise Control Noise.jpg
Gas Plant Noise Model
Noise Consulting Services
noise-barrier.png
Noise Barrier Analyses
Noise Impact Analysis.png
Noise Impact Analysis
Blast Noise Measurements.png
Blast Noise Measurements
In House Training and Workshop
training-1.png
Custom tailored training seminars
training-2.png
Noise Barrier / Wall Design
training-3.png
Hands-On Modal Testing
Wind Energy Noise Model
Noise Consulting Services
Rail Retarder Noise Model
Train Idle Noise Model
Wind_Turbine_Noise_Model.png
Leq_Contour_Map_ BarrierOptionA.jpg
Train_Idle_Input_Geometry.png
Noise Consulting Services
Sound Identification - Acoustic Intensity
Roller Coaster Noise Survey
Sound Power Level - Acoustic Intensity
Intensity_Furnace.jpg
44_LwComp.jpg
SWO_5_IMG_3747.JPG
Vibration Consulting Services
AIT-2 Modal Survey.png
Space Craft Flight Vibration.png
AIT-2 Modal Survey
Commercial & Military
Vibration Control
Modal Testing
Vibration Testing
Model Correlation
Structural Dynamic Modification
SIDLAB - Software Suite for Muffler and Silencer Design

SIDLAB Suite is a combination of software and hardware solutions for the analysis and measurement of sound generation and propagation inside duct networks. This can be applied to Intake and Exhaust systems, Power generation, Oil & Gas pipe networks and HVAC systems.

DP - Abacus Analyzer

Principal Hardware Specification

IRIS 3D Acoustic Impulse Response
IRIS Software Hedgehog display

IRIS is a room acoustics measurement system developed by Marshall Day Acoustics in New Zealand. It was released at the beginning of 2014 as a fully integrated hardware and software system for making 3D impulse response measurements.

SIDLAB Simulation of a Small Engine Muffler
Schematic of Small Muffler Schematic and Cross Section

Schematic of Small Muffler with two chambers and perforated openings between the chambers.

Zero-Position-Controller

The APS 0109 Zero-Position-Controller automatically controls the zero position of a vibration exciter irrespective of the payload. It is essential to employ a position controller of type APS 0109 especially when working with a vibration exciter without any integrated load compensation.

SIDLAB Flow
SIDLAB Double Plug Muffler Flow Model Schematic

SIDLAB Flow is a very quick 1D tool to calculate the pressure drop introduced by the designed muffler system. It calculates the flow distribution and pressure drop inside the network using a two-port formulation, and feeds the results into the acoustic calculation in SIDLAB Acoustics.

Data Physics - Data Acquisition Systems

Founded in 1984, the Data Physics Corporation has been supplying high performance vibration control and dynamic signal analysis solutions.   Since 1998 Navcon Engineering Network has been using Data Physics Analyzers for consulting services.  Since 2000 all data acquisition processed during the Ha

SoundPLAN - Sound Propagation Modeling Software
SoundPLAN v8 Manager GUI

SoundPLAN is an acoustic ray tracing program for noise propagation prediction written by the German acoustical consulting firm, SoundPLAN GmbH.

Attend one of our training sessions

Training dates:

Monday, August 21, 2023 to Thursday, August 24, 2023

Monday, November 13, 2023 to Thursday, November 16, 2023

Monday, December 11, 2023 to Thursday, December 14, 2023

Cost:
$3,200.00

Noise Contour Examples from SoundPLAN training
Training dates:

Wednesday, March 22, 2023 to Thursday, March 23, 2023

Wednesday, October 4, 2023 to Thursday, October 5, 2023

Cost:
$2,200.00

Training dates:

Wednesday, February 8, 2023 to Friday, February 10, 2023

Cost:
$2,600.00

Noise Measurement, Noise Modeling, Noise Assessment
Training dates:

Monday, March 20, 2023 to Tuesday, March 21, 2023

Monday, October 2, 2023 to Tuesday, October 3, 2023

Cost:
$2,200.00